ResinLab EP11HTFS Epoxy Adhesive Gray 50 mL Cartridge

Part number: EP11HTFS GRAY 50ML
ResinLab EP11HTFS Epoxy Adhesive Gray 50 mL Cartridge

Please contact your Ellsworth Customer Service Representative to confirm availability and delivery time.

Call Us

Call Us
Contact customer service at 888-458-0554.

Email Us

Email Us
Email our quotes team.

ResinLab EP11HTFS Gray is a two component, room temperature and heat curing, filled epoxy that is used for bonding plastics and metal. It is semi-rigid, thixotropic, non-sagging, and resistant to cryogenic temperatures, impact, vibration, salt solutions, and water. This is the fast setting version of EP11HT. 50 mL Cartridge.

ResinLab EP11HTFS Gray is a two component, room temperature and heat curing, filled epoxy that is used for bonding plastics and metal. It is semi-rigid, thixotropic, non-sagging, and resistant to cryogenic temperatures, impact, vibration, salt solutions, and water. This is the fast setting version of EP11HT. 50 mL Cartridge.
Typical Use: Ideal for bonding metals and plastics. Non-sag paste for large gap fill or vertical surfaces.
Chemical Composition: Epoxy
Color: Gray
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 24 to 72h @ 25 °C; 2h @ 65 °C
Dielectric Strength: 410 V/mil
Elongation: 1% to 2% @ break
Flash Point: Part A: >93 °C; Part B: >100 °C
Hardness: 85 D
Mix Ratio: 1:1 by volume; 1:1 by weight
Service Temperature: -40 to 150 °C
Shear Strength: 2,300
Specific Gravity: Mixed: 1.28
Tensile Strength: 7,000 psi
Viscosity: Mixed: 750,000
Volume Resistivity: 8 x 10^14 ohm-cm
Working Time: 30 to 40min

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.