Print
Email
Part number: EP1026HP 50ML
ResinLab EP1026HP Off-White is a two component, room and elevated temperature curing, high performance adhesive that is used for bonding plastics, metal, and ceramics. It is semi-rigid, free flowing, and resistant to salt spray, water, and most organic and inorganic solvents. 50 mL Cartridge.
| Typical Use: | Designed for high speed bonding of metals, ceramics, and most plastics. |
| Chemical Composition: | Epoxy |
| Color: | Off-White |
| Components: | 2 part |
| Cure System: | Heat |
| Cure Time: | 1h @ 100 °C |
| Dielectric Strength: | 440 V/mil |
| Elongation: | 20% to 30% @ break |
| Flash Point: | >93.3 °C |
| Hardness: | 80 D |
| Mix Ratio: | 1.04:1 by volume; 1:1 by weight |
| Peel Strength: | 15 pli |
| Service Temperature: | -40 to 130 °C |
| Shear Strength: | 3,500 |
| Specific Gravity: | Mixed: 1.15 |
| Tensile Strength: | 3,500 psi |
| Thermal Conductivity: | <0.2 W/mK |
| Viscosity: | Mixed: 12,500 |
| Volume Resistivity: | 8 x 10^14 ohm-cm |
-
$472.65Display Quantity PricingPart #: EDS408M -
$2.30Display Quantity PricingPart #: EAMAH06-21S -
$44.19Display Quantity PricingPart #: EA51-1 TO 1 / 2 TO 1 -
$262.67Display Quantity PricingPart #: EA50P -
$651.00 ($65.10 each)Sold as a pack (10/pk).Display Quantity PricingPart #: EP965 CLEAR 50ML