ResinLab EP1306 Gray is a two component, room temperature and heat curing, acrylic/epoxy hybrid adhesive that has good adhesion and wetting to most surfaces. It is resistant to acids, bases, water and most organic solvents. 50 mL Cartridge.
Typical Use: | Designed for use in side-by-side dispensing cartridges or meter/mix and dispense equipment. |
Chemical Composition: | Acrylic Epoxy |
Color: | Gray |
Components: | 2 part |
Cure System: | Room Temperature/Heat |
Cure Time: | 16 to 24h @ 25 °C; 1h @ 60 °C; 10min @ 100 °C |
Dielectric Strength: | 110 V/mil |
Elongation: | 0% to 1% @ break |
Flash Point: | Part A: >249 °C; Part B: >121 °C |
Hardness: | 80 D |
Mix Ratio: | 2:1 by volume; 2.07:1 by weight |
Service Temperature: | -40 to 150 °C |
Shear Strength: | 3,300 |
Specific Gravity: | Mixed: 1.59 |
Tensile Strength: | 4,500 psi |
Thermal Conductivity: | 0.9 W/mK |
Viscosity: | Mixed: 202,000 |
Volume Resistivity: | 1.1 x 10^16 ohm-cm |