ResinLab EP1295 Epoxy Encapsulant Part A Black 1 gal Pail

Part number: EP1295 BLACK - A GL Manufacturer SKU: EP1295 BLACK A GL
ResinLab EP1295 Epoxy Encapsulant Part A Black 1 gal Pail

We have been informed by the vendor that this item is discontinued and no longer available. Please contact your Ellsworth Customer Service Representative for assistance.

Call Us

Call Us
Contact customer service at 888-458-0554.

Email Us

Email Us
Email our quotes team.

ResinLab EP1295 Black is a two component, room temperature or heat curing, flame resistant epoxy casting system that has good air release, free flow, halogen free, and medium viscosity. It is resistant to salt solutions, water, organic and inorganic solvents. Part A, 1 gal Pail.

ResinLab EP1295 Black is a two component, room temperature or heat curing, flame resistant epoxy casting system that has good air release, free flow, halogen free, and medium viscosity. It is resistant to salt solutions, water, organic and inorganic solvents. Part A, 1 gal Pail.
Typical Use: Gives very good resistance to water, salt spray, inorganic acids and bases and most organic solvents. It cures quickly at room temperature to a tough, semi-rigid polymer. It has good wetting and adhesion to most surfaces.
Chemical Composition: Epoxy
Color: Black
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 16 to 24h @ 25 °C; 3h @ 65 °C; 1h @ 100 °C
Dielectric Strength: 410 V/mil
Elongation: 14%
Flash Point: >149 °C
Hardness: 58 D
Mix Ratio: 1:1 by volume; 1.04:1 by weight
Service Temperature: -40 to 150 °C
Shear Strength: 1,400
Specific Gravity: Part A: 1.50; Part B: 1.44; Mixed: 1.47
Tensile Strength: 900 psi
Thermal Conductivity: 0.36 W/mK
Viscosity: Part A: 11,000; Part B: 11,000; Mixed: 11,000
Volume Resistivity: 1.23 x 10^12 ohm-cm
Working Time: 10min

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.