Henkel Loctite 3616 is a heat curing epoxy adhesive designed for bonding of surface mounted devices to printed circuit boards prior to wave soldering. It is suited to printing a range of dot heights with one stencil thickness and where high wet strength characteristics, and high print speeds are required. 300 mL Cartridge.
Typical Use: | Designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering. |
Chemical Composition: | Epoxy |
Color: | Red |
Components: | 1 part |
Cure System: | Heat |
Cure Time: | 90 to 120s @ 150 °C |
Dielectric Strength: | 33.5 kV/mm |
Flash Point: | >93 °C |
Shear Strength: | >= 2,175 |
Specific Gravity: | 1.33 @ 25 °C |
Thermal Conductivity: | 0.2 W/mK |
Viscosity: | 15,000 to 55,000 @ 25 °C |
Volume Resistivity: | 4.6 x 10^15 ohm-cm |