Print
Email
Part number: HM128 50ML BOTTLE
Manufacturer SKU: AA001280050B0101
Please contact your Ellsworth Customer Service Representative to confirm availability and delivery time.
Permabond HM128 Threadlocker Anaerobic Adhesive is a high strength, environmentally friendly adhesive that is used for permanent assembly and prevention of vibration loosening. It fully cures quickly at room temperature to cross-linked plastics, steel, and common bolt platings. It offers corrosion protection, thread lubrication, off-torque control, and environmental resistance. 50 mL Bottle.
| Typical Use: | Used to seal and prevent vibration loosening of bolts, studs and cap screws where permanent assembly is required. Permabond HM128 replaces lock washers. |
| Chemical Composition: | Methacrylate ester |
| Color: | Red |
| Components: | 1 part |
| Cure System: | Anaerobic |
| Cure Time: | Full strength 24h |
| Dielectric Strength: | 11 kV/mm |
| Flash Point: | >93.3 °C |
| Gap Filling: | 0.15 mm |
| Key Specifications: | MIL-S-46163A Type I Grade K, ASTM D5363 AN0221 |
| Shear Strength: | 2,500 |
| Specific Gravity: | 1.1 |
| Thermal Conductivity: | 0.19 W/mK |
| Viscosity: | 500 |
-
Part #: ASC10 4OZ (PUMP) SPRAYER -
Part #: HH190 50ML TUBE -
Part #: LH050 50ML TUBE -
Part #: LM113 50ML BOTTLE -
Part #: MM115 50ML BOTTLE -
Part #: ET500 50ML KIT -
Part #: MH052 75ML ACCORDION BOTTLE