Cure Accelerator, to speed up room temperature cure of all addition-cure (platinum cure) mold making silicone rubbers. It can also be used as a surface treatment to prevent inhibition. Contains a silicone polymer and platinum catalyst. Learn More

4 Catalyst is easily mixed and poured, cures at room temperature, gives accurate reproductions of masters for moldmaking with primer, provides wide service temperature ranges and absorbs mechanical shock and vibration. 45 gram tube. Learn More

Dow Corning 510 Fluid is a clear, heat stable silicone fluid, pourable at very low temperatures, relatively flat viscosity temperature slope, highly resistant to permanent shear breakdown, excellent dielectric properties, water repellent and resistant to the effects of most gases, salts, dilute alkalis, and acids. 3.6 kg pail. Learn More

Dow Corning 710 Fluid properties include Heat resistance, high flash points, low volatility, and radiation resistance. Dow Corning 550 and 710 Fluids are compatible and miscible with each other. Learn More

Curing agent for Silastic 3481. Together they make a high strength silicone moldmaking rubber. Learn More

Curing agent for Silastic 3481. Use when demolding is needed after 5 hours. Learn More

Heat resistant, water repellent silicone electrical varnish. Learn More

Dow Corning 997 Varnish is a silicone resin in solvent, easy to use, excellent electrical properties; good bond strength retention and moisture resistant. Learn More

Dow Corning D94-20P Liquid Silicone Rubber is a two-part, non-slumping, heat-cure silicone elastomer designed to be easily mixed, dispensed, and cured directly on automotive and other industrial components to form a compression gasket. It is resistant to incidental contact with automotive fluids and many industrial chemicals. 362.8kg Kit. Learn More