Print
Email
Part number: 64C PT A 400 GR
Manufacturer SKU: 1189660
For current pricing and to place an order please contact your Ellsworth Customer Service Representative.
Henkel Loctite Ablestik 64C Gray, formerly Emerson and Cuming ECCOBOND, is a two component, thixotropic, epoxy adhesive paste that is used for applications that are exposed to salt water. It offers non-silvering properties, good electrical conductivity, and easy application. Part A, 400 g Can.
| Typical Use: | Recommended for use where exposure to sea water causes silver based electrically conductive adhesives to corrode. |
| Brand: | Ablestik |
| Chemical Composition: | Epoxy |
| Color: | Gray |
| Components: | 2 part |
| Cure System: | Room Temperature/Heat |
| Cure Time: | 24h @ 25 °C; 1h @ 70 °C |
| Flash Point: | >100 °C |
| Mix Ratio: | 100:5 by weight |
| Service Temperature: | -55 to 130 °C |
| Specific Gravity: | 3 |
| Tensile Strength: | 800 psi |
| Thermal Conductivity: | 1.44 W/mK |
| Viscosity: | Mixed: Thixotropic paste |
| Volume Resistivity: | 0.02 @ 25 °C ohm-cm |
| Working Time: | 40min @ 25 °C |
-
$2,477.76 ($103.24 each)Sold as a pack (24/pk).Display Quantity PricingPart #: 64C PT B 20 GR -
$2,278.20 ($189.85 each)Sold as a pack (12/pk).Display Quantity PricingPart #: 15 CATALYST BLACK 1 LB. -
$3,099.12 ($258.26 each)Sold as a pack (12/pk).Display Quantity PricingPart #: 45 BLK 1LB RESIN ONLY -
$3,254.64 ($271.22 each)Sold as a pack (12/pk).Display Quantity PricingPart #: 285 BLACK 2LB INDIVIDUAL