Print
Email
Part number: EN-5852 BLACK GALLON KIT
| Quantity | Price |
|---|---|
| 1 | $214.02 |
| 2-6 | $183.26 |
| 7+ | $173.01 |
Usually Ships in 2-3 Business Weeks. Subject to prior sales. Non-returnable product. Canceled orders may incur a fee at the supplier’s discretion. Product not sold online in Quebec.
ELANTAS PDG CONAP EN-5852 Polyurethane Resin System Black is a two component encapsulating system featuring UL Relative Temperature Index (RTI) of 130 °C, a low durometer of shore A 85 hardness, and UL 94 V-0 rating at 2.8 mm thickness. The combinations of these features enable excellent flame retardancy at lower material thickness and flexibility over a wide temperature range. The end result is reduced stress and a heat resistant environment for your electronic components. The 1 gal Kit consists of Part A in a 1 qt size, and Part B in a 1 gal size.
| Typical Use: | ELANTAS PDG CONAP EN-5852 is used for potting and encapsulating electrical components, assemblies, circuit boards, and modules. |
| Brand: | CONAP |
| Color: | Part A: Brown; Part B: Black |
| Components: | 2 part |
| Cure Time: | Firm Gel Time: 20 to 30min @ 25 °C; Full Cure: 7d @ 25 °C; Alternate Cure: 16h @ 80 °C |
| Dielectric Strength: | 460 V/m |
| Elongation: | 180% |
| Hardness: | 85 A |
| Key Specifications: | UL 94 V-0 @ 2.8 mm and UL RTI 130 °C |
| Mix Ratio: | 1:4 by volume; 20:100 by weight |
| Specific Gravity: | Part A: 1.21; Part B: 1.45 |
| Tensile Strength: | 860 psi |
| Thermal Conductivity: | 0.60 W/mK |
| Viscosity: | Part A: 460; Part B: 17,500; Mixed: 8,500 |
| Volume Resistivity: | 1.1 x 10^15 ohm-cm |
